FREQUENTLY ASKED QUESTIONS OF CERAMIC COATING

What advantages does CS-II Ceramic Coating have over other coats like clear coats?

CS-II Ceramic Coating provides additional gloss and protection over the clear coats. Contaminants slide off easily on the Ceramic Coating, reducing the time they eat into the paint surface. An additional advantage is the ease of cleaning your vehicle.

Can CS-II Ceramic Coating be treated on most areas?

CS-II Ceramic Coating can be treated on all exterior surfaces including paint, glass, metal, stainless steel, chrome, gel coat, plastic composites, exhaust and wheels. CS-II Ceramic Coating should not be used on rubber or soft plastics.

Can CS-II Ceramic Coating be applied on rubber moldings?

CS-II Ceramic Coating Resin or Pre-Clean should not be used on rubber moldings or rubber seals.

Carbon fiber too?

Definitely, you can apply CS-II Ceramic Coating to carbon fiber shields, panels, and parts.

What about my decals, emblems, etc.?

CS-II Ceramic Coating can be applied right over any decals and will even add gloss to your emblems.

Permanent coating?

You can think of CS-II Ceramic Coating Resin as adding a glossier, chemical resistant, and harder clear coat to the paint’s surface. CS-II Ceramic Coating is a permanent coating in the same sense that the clear coat on your car is permanent. The existing clear coat will eventually wear away over time; its overall longevity depends on factors and proper application.

Is a special car wash or soap needed to wash my vehicle before application?

There is no need for any special washing detergent or soap; any residue will be removed by our CS-II Ceramic Coating Pre-Clean Solution (Dewax).

What about after application?

Fortunately, there is no need to wash with special washing soap or shampoo. You can even use an automated car wash to clean your car.

Can CS-II Ceramic Coating be waxed or sealed over?

Waxing or sealing over CS-II Ceramic Coating will not damage the coating. However, allow the CS-II Ceramic Coating to cure for at least 3 days before applying another product.

  

What is the curing time for CS-II Ceramic Coating?

CS-II Ceramic Coating cures immediately after application. After the coating has cured, it is best to avoid washing the car or driving in rain for the next day. Over the next 3 days, CS-II Ceramic Coating will continue to become harder until the surface reaches maximum hardness.

After my coating has cured, is there a way to remove it?

After the CS-II Ceramic Coating has cured, it can only be removed by polishing (compounding) or wet sanding.

Do I need to remove bird droppings from my car instantly?

Remove bird droppings from your car as soon as possible. To remove them easily, saturate the dropping and wipe off. Avoid scraping.

What happens when the water repellency of my coating decreases?

The water repellency of the coating will decrease over time due to the buildup of contaminants. To resolve the problem, just clean the surface with a mild cleaner and wash off thoroughly with water. The hydrophobic effect will then be reproduced.